Specifications

Product type: Countertop support bracket
Material: 16-gauge mild steel
Finish: Powder coated
Weight rating: 500 lb. per bracket
Screw-hole thread size: 1/4-inch-20
Maximum spacing between brackets: 30 inches
Maximum recommended overhang: 4 inches
Installation requirement: Attach brackets to studs
Intended installation: Concealed
Country of manufacture: USA

ADA Compliant Countertop Support

$160.00

Shipping:

Calculated at Checkout

ADA-Compliant Countertop Support

The ADA-Compliant Countertop Support is designed to support wall-mounted vanities, desks, and natural stone countertops where wheelchair-accessible clearance is needed. The bracket can be mounted at the appropriate height to help create accessible space for wheelchair users.

Manufactured in the USA from 16-gauge mild steel with a powder-coated finish, each bracket has a listed weight capacity of 500 lb. The support is designed to remain hidden behind stone, laminated panels, or another appropriate enclosure.

Typical Applications

Wheelchair-accessible countertops
Wall-mounted vanities
Wall-mounted desks
Natural stone countertop installations
Applications requiring open knee clearance
Concealed countertop support installations

Advantages

Designed for ADA-compliant countertop applications
Ideal for wheelchair-accessible vanity and desk installations
500 lb. listed weight rating per bracket
Constructed from 16-gauge mild steel
Durable powder-coated finish
Designed to be concealed with stone or laminated panels
Made in the USA

Recommended Bracket Quantities

4-foot span: Two brackets
5-foot span: Three brackets
8-foot span and larger: Four or more brackets with compliant spacing

Mounting Guidelines

For wooden studs, use a recommended 5/16-inch x 2-inch lag screw
For metal studs, use an equivalent fastener such as a bolt and nut
Metal screws are not recommended
Secure each bracket directly into a stud or another appropriate structural support
Keep spacing between brackets to no more than 30 inches on any span
Do not exceed 4 inches of overhang at any point
Mounting-hole placement for apron and fascia panels will vary based on project width
End panels may be incorporated depending on the application

ADA Installation Guidelines

According to the provided installation guidelines, sinks should be installed no higher than 34 inches above the floor. Knee clearance should measure at least 27 inches high by 30 inches wide, with a depth of 11 to 25 inches.

Every installation should comply with applicable building codes and current ADA requirements. A secure mounting surface is necessary to provide proper support and help minimize the risk of installation failure or injury.

Frequently Asked Questions

What is this countertop support designed for?

It is designed for wall-mounted vanities, desks, and countertops where wheelchair-accessible knee clearance is required.

What is the weight rating?

Each bracket has a listed weight rating of 500 lb.

How far apart can the brackets be installed?

The installation guidelines call for no more than 30 inches of space between brackets.

How should the bracket be mounted to a wooden stud?

The recommended installation method uses 5/16-inch x 2-inch lag screws secured directly into a wooden stud.

Can the bracket be mounted to a metal stud?

Yes. An equivalent fastener, such as a bolt and nut, should be used. Metal screws are not recommended.

How much countertop overhang is recommended?

The support is not recommended for applications with more than 4 inches of overhang at any point.

Is the bracket intended to remain visible?

No. The bracket is designed to be concealed behind stone, laminated panels, or another suitable enclosure.

Hammersmark LLC offers professional stone fabrication tools, adhesives, polishing supplies, installation products, and equipment used by fabricators across North America.

Hammersmark LLC has you covered!